ALUCUTLINE nylon line

The ratioparts AluCut mowing line made from the best plastic raw material (nylon copolymers) is interspersed with aluminium particles. This labou-saving technology ensures:

>> for better heat dissipation (prevents largely melting lines)

>> for an increase in service life

>> for abrasive mowing behaviour and high cutting performance in the clippings


Hybrid twisted AluCut nylon line

This line has cutting edge reinforcements made of very tough and wear-resistant plastic. As a result, the mowing line has a high resistance to impact, rubbing and abrasion, and is therefore particularly wear-resistant. With our AluCut variant, this effect is reinforced again. The copolymer plastic with aluminum powder used for our cutting lines is particularly shock and abrasion resistant.


>> Cutting edge reinforcement

>> Extremely wear-resistant

>> Copolymer with aluminium

>> Particularly shock and abrasion resistant


Brush cutter lines 

Why is it important to choose high quality brush cutter lines? The quality of the trimmer lines is reflected directly in the cutting performance and the consumption of nylon lines. This ratio is perfectly coordinated with our products. The high quality demands on our brush cutter lines has resulted in continuous improvements in their service life and cutting performance. In addition to our copolymer brush cutter lines, we also offer you the premier class of trimmer lines, the cutting line with aluminium particles. Here you can choose between two product series, which come in different versions. The AluCut mowing lines are high quality products, developed for the highest demands and loads. Areas of application are grass, weeds and soft undergrowth. Our ratioparts AluCut lines are developed for professional use.


If you are looking for spare parts to repair your brush cutter, then you have come to the right place. Our range of products will provide you with everything you need to repair your defective trimmer. From angular gears to throttles, you can find all parts at a fair price. If  you are looking for high quality and top performance of your brush cutters at a fair price, you are always on the safe side with our brush cutter knives, line heads, mower heads and nylon lines. In addition, if you want your brush cutter to run in a reliable environmentally friendly manner, you will find the right oil and fuel from us, which is manufactured in Germany according to the highest standards.

How do I find the right product for my brush cutter?

For all device-specific spare parts, you have the option of using the manufacturer number or the model to find the required spare part. You can simply use the filter functions in our online shop or browse through our online catalogue. You have choices when it comes to consumables such as nylon line and brush cutter knives. We deliver top quality cutting materials for your brush cutter in all possible designs. Our more than 30 years of experience in this field enables us to continuously improve our products and guarantee that you will have the best experience. In the following we explain everything you need to know about brush cutter lines, brush cutter knives, weed brushes & Co.

MUST HAVES

# 61-8091
# 6-707
# 6-708
# 6-12021
# 6-352
# 6-350
# 61-880

Weed brushes

Whether a public company, service provider, trader or private user, environmentally friendly solutions for weed removal without chemicals are required for the maintenance of company properties, parking lots, courtyard entrances and paths. Weeds and grass are undesirable plants that spread quickly. They don’t just have to be removed for aesthetic reasons, as they can also cause severe damage to driveways and surfaces.  Weeds have a lot of power - if they are not removed regularly, they can even lift cobblestones or tear open road surfaces. Weed removal is therefore an essential and regular task when cleaning surfaces. The use of herbicides in accordance with Section 12 (2) of the Plant Protection Act, in which plants are sprayed and killed down to the roots, is generally prohibited on areas that are not used for agriculture, horticulture or forestry, as it causes a significant damage to the environment. An exemption for paved and compacted areas can only be granted under special circumstances and with proof of competence. Mechanical weed removal is the environmentally friendly method. It uses tools with special brushes that mechanically separate the plant from the root.


Environmentally friendly removal of weeds

There are various approaches and solutions for the chemical-free removal of weeds on sealed surfaces. In recent years, a wide variety of manufacturers have brought a variety of devices onto the market. Thanks to our many years of experience in the field of cleaning technology, we have selected, tested and added some promising products to our inventory.


Mechanical weed removal using weed brushes

Weed brushes are used to easily control weeds on paved surfaces, especially on curbs and edges. The horizontally rotating plate, equipped with surface-friendly wire or plastic brushes or with robust wire braids, removes even the most stubborn kind of weeds, resulting in an immediate visibly clean results. The weed brushes are suitable for a wide variety of soil types, including paved roads and pathways. To protect the surrounding people, cars, etc., we offer you the appropriate protective hoods or protective walls so that you can work effectively by concentrating on your work without worrying about causing any damage.

# 6-5625
# 6-5625

Brush cutter knife

We offer you a wide variety of options when it comes to choosing the right knife for your brush cutter. Countless shapes and designs can make you ask: Which device provides the optimal solution for my application? The answer is easy. Which bore diameter fits my brush cutter? The hole diameter of the knife corresponds to the holder of your brush cutter and the driver of your scythe determines the diameter of the hole of the suitable knife. A distinction must be made between two different sizes, 20.0 mm or 25.4 mm. As soon as you have determined the mounting of your brush cutter, you may ask: Which knife suits my requirements?


Grass cutting blades


Grass cutting blades are knives that are mainly used to cut grass or light weeds. Due to the low thickness of the material, they achieve a high and clean cutting performance


Germany type 

>> 8-tooth knife for mounting on brush cutters 

>> Knife for cutting: Weeds and strong and dry grass

>> Can also be used for reeds and thin shrubbery

France type 

>> 4-tooth knife for mounting on brush cutters 

>> Knife for cutting: Weeds and strong and dry grass

>> Can also be used for reeds and thin shrubbery

Germany type I 

>> 3 - 4-tooth knife for mounting on brush cutters 

>> Knife for cutting: Weeds and strong and dry grass

>> Can also be used for reeds and thin shrubbery

Japan type 

>> 4-tooth knife for mounting on brush cutters 

>> Knife for cutting: Weeds and strong and dry grass

>> Can also be used for reeds and thin shrubbery


Thicket knives


Thicket knives are the most common form of knives for brush cutters and trimmers. Available in different designs, material thickness's and diameters, they can be used for cutting weeds along with thick, tough, matted grass and undergrowth as well as smaller bushes.


2-tooth rectangular shape

>> 2-tooth knife for mounting on brush cutters
>> Knife for cutting: Weeds and tough, matted grass and undergrowth
>> Can also be used for smaller shrubbery

2-tooth trapezoidal shape

>> 2-tooth knife for mounting on brush cutters

>> Knife for cutting: Weeds and tough, matted grass and undergrowth

>> Can also be used for smaller shrubbery

3-tooth German type

>> 3-tooth knife for mounting on brush cutters

>> Knife for cutting: Weeds and tough, matted grass and undergrowth

>> Can also be used for smaller shrubbery

3-tooth HUSQVARNA type

>> 3-tooth knife for mounting on brush cutters
>> Knife for cutting: Weeds and tough, matted grass and undergrowth
>> Can also be used for smaller shrubbery


Thicket mulching knives


Thicket mulching knives are used to mulch undergrowth and small bushes (thorn hedges). In addition to the properties of the thicket knives, the cuttings are mulched through the angled ends of the knife and thus serve as natural fertilizer.


2-tooth thicket mulching knife

>> 2-tooth knife for mounting on brush cutters

>> Knife for mulching: Weeds, tough, matted grass and undergrowth

>> Can also be used for smaller bushes

>> Due to the angled shape, this knife is suitable for mulching

3-tooth knife 90° 3-tooth knife 90°

3-tooth knife 90°

>> 3-tooth knife for mounting on brush cutters

>> Due to the angled shape, this knife is suitable for mulching: Weeds and tough, matted grass and undergrowth

>> Can also be used for smaller shrubbery

2-tooth thicket mulch knife S-shape

>> 2-tooth knife for mounting on brush cutters 
>> Thicket mulch knife for mulching and thinning out undergrowth
>> Can be used for cutting back smaller bushes (thorn hedges)
>> Due to the angled shape, this knife is suitable for mulching:

3-tooth knife 45°

>> 3-tooth knife for mounting on brush cutters

>> Due to the angled shape, this knife is suitable for mulching: Weeds and tough, matted grass and undergrowth

>> Can also be used for smaller shrubbery


Saw blades


Saw blades come in four different designs. The most robust version are carbide knives with 20 or 24 pointed teeth. The material thickness of these knives is significantly stronger than that of the saw blades with chisel or saw tooth and are therefore suitable for particularly demanding applications with high material requirements. Chisel tooth knives come in EIA and MAXI versions. Both versions are knives for clearing work that can be easily re-sharpened if necessary. The pointed-tooth knives close up the saw blades for brush cutters. With up to 80 teeth, they are suitable for applications where a fine cut is needed. All saw blades are suitable for cutting gnarled bushes, thin tree trunks and other sawing applications in forestry.


Carbide knives

>> 20 and 24 sawtooth knives for mounting on brush cutters

>> Saw knives for cutting: knotty bushes, thin tree trunks and other sawing uses in forestry

>> The carbide tipping ensures a longer service life and high load capacity

Chisel tooth knife TYPE MAXI

>> 22 saw tooth knife for mounting on brush cutters

>> with chisel teeth type MAXI

>> Saw knife for cutting: gnarled bushes, thin tree trunks and other sawing applications in forestry

Chisel tooth knife TYPE EIA

>> 22 saw tooth knife for mounting on brush cutters

>> with chisel teeth type EIA

>> Saw knife for cutting: gnarled bushes, thin tree trunks and other sawing applications in forestry

Pointed tooth knives

>> 44, 54 and 80 saw tooth knives for mounting on brush cutters
>> Saw knives for cutting: gnarled bushes, thin tree trunks and other sawing applications in forestry
Lataa…