Wet dry vacuum cleaner Clean Track PumpLine 70-2-STBL FI

Wet dry vacuum cleaner Clean Track PumpLine 70-2-STBL

Suck and pump at the same time!

The two motors of the PumpLine 70-2-STBL vacuum cleaner offer up to 2000 watts of power and make it possible to generate a vacuum of 200 mbar. The air flow rate is 106 litres per second. The stainless steel tank with a capacity of 70 litres is mounted on a plastic chassis, which has two large rear and two small front swivel castors. 
The built-in 750 W stainless steel submersible pump has its own power supply. Thanks to an integrated float, the pump can be used in continuous or automatic mode. An overflow protection switches off the suction flow automatically when the tank is filled to the maximum. The sucked-in water can be conveyed directly with a C-hose via the C-hose coupling at the rear of the tank. With this pump, you can achieve a maximum delivery distance of 50 metres and a maximum delivery height from the suction cup of approx. 7.5 metres. The unit comes with an adapter from Storz-C to GeKa coupling.
The mains connection cable is 7.2 m long and allows a large radius of action. The suction hose (NW 38mm) is 3.5 m long. The S-shaped suction tube is equipped with a 40 cm wide floor nozzle.
The vacuum cleaner is suitable, among other things, for flood or residual water removal, for heating and sanitary installations, flat roof renovation and for pond or pool cleaning. 

∙ 2 motors
∙ 2000W by-pass
∙ Negative pressure: 200 mbar
∙ Air output: 106 l/sec.
∙ 750W stainless steel submersible pump
∙ max. pump capacity: 13500 l/hr. 
∙ max. delivery distance: 50 m
∙ max. delivery height from suction: 7.5 m 
∙ max. conveyed grain size: Ø 35 mm
∙ max. water temperature: 35° C
∙ Machine head with FI circuit breaker